LinkEx™ Portable Fluorescent Leadlamp Emergency

Product Code: LL-540/E
Download PDFs:
PDF Icon

The LinkEx™ Portable Fluorescent Leadlamp Emergency has a built-in back-up battery power supply to light the lamp in the event of a power failure and is ideal for exit route lighting allowing hazardous area workers to find their way to safe areas and emergency meeting points.

The Emergency Leadlamps are ATEX Directive and IECEx Certified for safe use in Zone 1 (Cat 2) IIC potentially explosive gas, vapour, mist and dust atmospheres, where a T3 temperature class permits and have twin side by side forward facing 36W energy efficient fluorescent lamps, delivering 5800 lumens output, available in voltages of 110V to 130V.

 

Upon power failure, the Emergency Leadlamp’s battery back-up supply initiates and powers one fluorescent tube immediately at a reduced power level, giving approx. three hours light output. The leadlamp should be charged/discharged 3 times upon commissioning to ensure the battery is cycled to peak capacity, charging time shall be min 24hrs. If powered for a short time the battery duration will be proportionally reduced.

 

The Emergency Leadlamp is supplied with an ATX plug and socket to allow the units to be instantly linked together, allowing for quick and easy installation over a large area and can be used in a chain, in series or intermittently, with Wolf’s range of LinkEx™ Luminaires and Floodlites.

 

Unistrut compatible mounting points on the lamps provide a flexible and low cost installation solution allowing them to be quickly and easily fixed in position on pipes, scaffold or a ferrous backdrop with magnetic fixings. In addition, the leadlamps are easy to maintain and re-lamping is simple using standard compact fluorescent lamps and can be done by a competent electrical engineer.

 

Features & Benefits

  • ATEX and IECEx Certified for Zone 1 and 2 explosive gas and Zones 21 and 22 dust atmospheres
  • Emergency back-up light
  • Up to 3 hours battery duration after full charge
  • Fitted with plugs and sockets, linkable in series
  • Twin lamp configuration
  • Compact and robust design
  • Wide voltage range 110V – 130V
  • Uses standard compact fluorescent lamps for ease of maintenance
  • Control ballast incorporates ‘End of Life’ protection circuit
  • Integrated Unistrut compatible mounting points

The LinkEx™ Portable Fluorescent Leadlamp Emergency has a built-in back-up battery power supply to light the lamp in the event of a power failure and is ideal for exit route lighting allowing hazardous area workers to find their way to safe areas and emergency meeting points.

The Emergency Leadlamps are ATEX Directive and IECEx Certified for safe use in Zone 1 (Cat 2) IIC potentially explosive gas, vapour, mist and dust atmospheres, where a T3 temperature class permits and have twin side by side forward facing 36W energy efficient fluorescent lamps, delivering 5800 lumens output, available in voltages of 110V to 130V.

 

Upon power failure, the Emergency Leadlamp’s battery back-up supply initiates and powers one fluorescent tube immediately at a reduced power level, giving approx. three hours light output. The leadlamp should be charged/discharged 3 times upon commissioning to ensure the battery is cycled to peak capacity, charging time shall be min 24hrs. If powered for a short time the battery duration will be proportionally reduced.

 

The Emergency Leadlamp is supplied with an ATX plug and socket to allow the units to be instantly linked together, allowing for quick and easy installation over a large area and can be used in a chain, in series or intermittently, with Wolf’s range of LinkEx™ Luminaires and Floodlites.

 

Unistrut compatible mounting points on the lamps provide a flexible and low cost installation solution allowing them to be quickly and easily fixed in position on pipes, scaffold or a ferrous backdrop with magnetic fixings. In addition, the leadlamps are easy to maintain and re-lamping is simple using standard compact fluorescent lamps and can be done by a competent electrical engineer.

 

Features & Benefits

  • ATEX and IECEx Certified for Zone 1 and 2 explosive gas and Zones 21 and 22 dust atmospheres
  • Emergency back-up light
  • Up to 3 hours battery duration after full charge
  • Fitted with plugs and sockets, linkable in series
  • Twin lamp configuration
  • Compact and robust design
  • Wide voltage range 110V – 130V
  • Uses standard compact fluorescent lamps for ease of maintenance
  • Control ballast incorporates ‘End of Life’ protection circuit
  • Integrated Unistrut compatible mounting points

Would you like to know more?

Our team can help you with any product information, quotes, or any general questions you may have about the product.

Product logos in a grid

Your no.1 solution to all of your workwear needs

Putting the ‘direct’ in directory since 2009. With our global catalogue of quality safety and environmental monitoring products all under one roof, we put an end to lengthy, saturated searches. At OSE, just find and enquire and we will put you in touch with the right person to make your product purchase.

Product logos in a grid

Product Selected

LinkEx™ Portable Fluorescent Leadlamp Emergency

Make an Enquiry

"*" indicates required fields

*
Country
Hidden
This field is for validation purposes and should be left unchanged.

In a rush? Call our team today

|

Get the newsletter - Keep up to date with Health, Safety & Environmental monitoring products from across the globe with our free newsletter