Working in areas with combustible gases, vapours or materials requires fire/flame detection as a life-saving necessity. The best solutions must combine state-of-the-art technology with rugged durability and be ready to reliably work in any situation. Dräger offers a wide variety of high-quality flame-detectors that fulfil these requirements.

Benefits

Reliability You Can Count On

• The Dräger Flame 2700 is a Multi IR Flame Detector and is specifically designed to detect hydrocarbon and hydrogen flames at long distances. Its high immunity to false alarms and superior performance features makes it ideal for a large number of applications.

Built To Resist

• As one of the most weather resistant detector currently on the market, the Flame 2700 comes with features for various extremes such as a heated window against icing and up to 95 % non-condensation during humid phases.

A Sharp Eye For Greater Safety

• With the ability to detect a 0.1 m2 gasoline pan fire at 65 m or a hydrogen flame at 30 m in less than 5 seconds, the Flame 2700 offers the best in reliability. Additionally, its MTBF minimum of 150,000 hours ensures a longer and hassle-free operating period – a big plus for the safety of your workers and operations.

Intelligent Design

• The Flame 2700 is also built with operating convenience in mind. This can be seen in its lower power requirements and a compact, lighter design that makes installation and maintenance easier.

Reliability

• Functional safety is a concept applicable across all industry sectors. It is fundamental to enabling complex technology used for safety-related systems. It provides assurance that the safety-related systems will offer necessary risk reduction. The Dräger Flame 2700 is highly reliable and complies with the IEC 61508 Safety Integrity Requirements of SIL2.

Automatic and manual optics checks (BIT)

• Automatic checks of the detector electronics and optics help to ensure that no fault goes undetected. Additionally the test can be triggered manually at any time.

Easily visible status LED

• A tri-colored LED which is visible at the front of the detector provides a simple status indication to personnel in close proximity to the detector. Green indicates normal operation; yellow indicates a fault and red indicates the presence from radiation a fire.

Simple installation and commissioning

• Installation is simple! The detector is easily installed with a stainless steel tilt mount which enables the detector to be rotated up to 60° in all directions to position the detector in relation to the potential fire source.

Further benefits and features:

• Multi spectrum design – for long distance detection and high false alarm immunity
• Advanced Digital Processing of the Dynamic Characteristics of Fire (flickering, threshold correlation and ratio)
• Sensitivity selection – to ensure no zone crossover detection
• Automatic and Manual Built-In-Test (BIT) – to assure continued reliable operation
• Heated window – for operation in harsh weather conditions (snow, ice, condensation)
• Multiple output options for maximum flexibility and compatibility
• 3 Relays for Alarm, Fault and Auxiliary
• 0-20 mA (stepped)
• HART® Protocol for maintenance and asset management
• RS-485, Modbus compatible
• Approved to Safety Integrity Level 2 (SIL2 – TÜV)
• Ex approvals for worldwide application: ATEX, IECEx, FM/FMC, CSA