Tri-Axial Transient Shock Data Logger

OM-CP-TSR101-50
Download PDFs:
PDF Icon

The OM-CP-TSR101 is a battery powered, stand alone 3-axis shock data logger. The OM-CP-TSR101 measures and records instantaneous shock levels when the user-selectable shock levels have been exceeded. There are 15 rates to chose from ranging from 1024 to 1 Hz.

The OM-CP-TSR101 is valuable in characterizing environments such as packaging and fragility assessment (drop testing), break and crash testing, and shipping validation. This is an all-in-one compact, portable, easy to use device that will measure and record approximately 349,000 measurements per axis.

The storage medium is non-volatile solid state memory, providing maximum data security even if the battery becomes discharged. The device can be started and stopped directly from your computer and its small size allows it to fit almost anywhere.

The OM-CP-TSR101 makes data retrieval quick and easy. Simply plug it into an empty COM or USB port and our user-friendly software does the rest. 

SPECIFICATIONS

Channels: Shock (3-axis)

Accelerometer Type: MEMS semiconductor

Sampling Rate: 15 options, from 0.967 ms/1024 Hz to 1 sec, software selectable

Frequency Response: 0 to approx. 400 Hz (50 g, 100 g and 250 g units); 0 to approx 512 Hz (5 g unit)

Memory: 349,525 readings per axis (1,398,100 total readings)

Trigger: User selectable trigger levels on X, Y and/or Z axes, and specifies number of samples after trigger(s)

Pre-Trigger: Records a pre-trigger of up to 50 readings prior to trigger point

Real Time Recording: May be used with PC to monitor and record instantaneous acceleration in real time (1 sec or slower reading rate, not possible during logging)

Start Modes: Software programmable immediate start or delay start up to 180 days in advance

Password Protection: An optional password may be programmed into the device to restrict access to configuration options. Data may be read out without the password

Calibration: Digital calibration through software

Calibration Date: Automatically recorded within device

Power: 9 V lithium or alkaline battery (included), user replaceable

Battery Life: 7 days typical with lithium battery

Data Format: Date and time stamped gravities (3-axis)

Time Accuracy: ±1 minute per month at 20 to 30°C

Computer Interface: USB or serial interface (cable required); 115,200 baud

Software: XP SP3/Vista/7 and 8 (32-bit and 64-bit)

Operating Environment: -20 to 60°C (-4 to 140°F), 0 to 95% RH, non-condensing

Dimensions: 89 H x 112 W x 26 mm D (3.5 x 4.4 x 1.0″)

Weight: 340 g (12 oz)

Material: Anodized aluminum

The OM-CP-TSR101 is a battery powered, stand alone 3-axis shock data logger. The OM-CP-TSR101 measures and records instantaneous shock levels when the user-selectable shock levels have been exceeded. There are 15 rates to chose from ranging from 1024 to 1 Hz.

The OM-CP-TSR101 is valuable in characterizing environments such as packaging and fragility assessment (drop testing), break and crash testing, and shipping validation. This is an all-in-one compact, portable, easy to use device that will measure and record approximately 349,000 measurements per axis.

The storage medium is non-volatile solid state memory, providing maximum data security even if the battery becomes discharged. The device can be started and stopped directly from your computer and its small size allows it to fit almost anywhere.

The OM-CP-TSR101 makes data retrieval quick and easy. Simply plug it into an empty COM or USB port and our user-friendly software does the rest. 

SPECIFICATIONS

Channels: Shock (3-axis)

Accelerometer Type: MEMS semiconductor

Sampling Rate: 15 options, from 0.967 ms/1024 Hz to 1 sec, software selectable

Frequency Response: 0 to approx. 400 Hz (50 g, 100 g and 250 g units); 0 to approx 512 Hz (5 g unit)

Memory: 349,525 readings per axis (1,398,100 total readings)

Trigger: User selectable trigger levels on X, Y and/or Z axes, and specifies number of samples after trigger(s)

Pre-Trigger: Records a pre-trigger of up to 50 readings prior to trigger point

Real Time Recording: May be used with PC to monitor and record instantaneous acceleration in real time (1 sec or slower reading rate, not possible during logging)

Start Modes: Software programmable immediate start or delay start up to 180 days in advance

Password Protection: An optional password may be programmed into the device to restrict access to configuration options. Data may be read out without the password

Calibration: Digital calibration through software

Calibration Date: Automatically recorded within device

Power: 9 V lithium or alkaline battery (included), user replaceable

Battery Life: 7 days typical with lithium battery

Data Format: Date and time stamped gravities (3-axis)

Time Accuracy: ±1 minute per month at 20 to 30°C

Computer Interface: USB or serial interface (cable required); 115,200 baud

Software: XP SP3/Vista/7 and 8 (32-bit and 64-bit)

Operating Environment: -20 to 60°C (-4 to 140°F), 0 to 95% RH, non-condensing

Dimensions: 89 H x 112 W x 26 mm D (3.5 x 4.4 x 1.0″)

Weight: 340 g (12 oz)

Material: Anodized aluminum

Would you like to know more?

Our team can help you with any product information, quotes, or any general questions you may have about the product.

Product logos in a grid

Your no.1 solution to all of your workwear needs

Putting the ‘direct’ in directory since 2009. With our global catalogue of quality safety and environmental monitoring products all under one roof, we put an end to lengthy, saturated searches. At OSE, just find and enquire and we will put you in touch with the right person to make your product purchase.

Product logos in a grid

Product Selected

Tri-Axial Transient Shock Data Logger

Make an Enquiry

"*" indicates required fields

*
Country
Hidden
This field is for validation purposes and should be left unchanged.

In a rush? Call our team today

|

Get the newsletter - Keep up to date with Health, Safety & Environmental monitoring products from across the globe with our free newsletter