Thermistor Probe Temperature Data Logger with LCD Display

OM-EL-USB-TP-LCD
Download PDFs:
PDF Icon

The OM-EL-USB-TP-LCD standalone data logger measures and stores up to 32,510 temperature readings from the supplied thermistor probe which is attached via the socket at the base of the unit. The user can easily set-up the logging rate and start-time, and download the stored data by plugging the data logger into a PC’s USB port and running the included Windows software. Data can then be graphed, printed and exported to other applications.

The data logger features an LCD display and pushbutton which allows the user to cycle through the most recent, highest and lowest stored temperature readings. The data logger is supplied complete with a long-life lithium battery, which can typically allow logging for up to 6 months. The OM-EL-USB-TP-LCD is suitable for a wide variety of applications including high and low temperature monitoring, transportation, food processing, building and site monitoring and HVAC.

Windows software is supplied free of charge with each data logger. Easy to install and use, the control software runs under Windows XP, Vista, 7 and 8. The software is used to set-up the data logger as well as download, graph and export data to Excel. The software allows for the following parameters to be configured: logger name, temperature units (°C, °F), logging rate (1 sec, 10 sec, 30 sec, 1 min, 5 min, 30 min, 1 hr, 6 hr, 12 hr), high and low alarms, start mode (immediate, delayed and push-to-start logging), display mode (display off, on for 30 seconds after button press, or permanently on) and data rollover (allows unlimited logging periods by overwriting the oldest data when the memory is full).

Thermistor Probe

The probe supplied with the OM-EL-USB-TP-LCD uses a precision thermistor to sense the temperature. The probe length may be extended by the use of a suitable extension cable (use twisted pair with high quality 3.5 mm jack socket/plugs for best results).

SPECIFICATIONS

Probe Temperature Measurement Range: -40 to 125°C (-40 to 257°F)

Resolution (Internal and Displayed): 0.5°C (1.0°F)

Accuracy (Data Logger Error @ 25°C): ±0.1°C (±0.2°F) typical (does not include thermistor probe error)

Accuracy (Thermistor Probe): See thermistor probe accuracy charts on PDF

Operating Temperature Range (Data Logger): -10 to 40°C (-14 to 104°F)

Memory: 32,510 readings

Memory Wrap Around (Rollover): Yes (software selectable)

Logging Interval: 1 sec, 10 sec, 30 sec, 1 min, 5 min, 30 min, 1 hr, 6 hr, 12 hr

Software: Windows XP/Vista/7 and 8 (32- and 64-bit)

Alarm Thresholds: High/low alarm thresholds for temperature (software selectable)

Start Mode: Immediate, delayed and push-to-start logging (software selectable)

Status Indicators (LEDs): Red and green LEDs. The first LED flashes red to indicate that the OM-EL-USB-TP-LCD is in an alarm condition (logged temperature has exceeded a high or low alarm level). The second LED flashes green to indicate that the OM-EL-USB-TP-LCD is logging normally and is not in an alarm condition.

Power: 1/2 “AA”, 3.6V lithium battery (included)

Battery Life: 6 months typical at 25°C (77°F) (depends on sample rate, ambient temperature and LCD use)

Dimensions:

Data Logger: See dimensional drawing on PDF

Standard Thermistor Probe

  • Cable: 1 m (3′)
  • Probe Tip: Stainless steel, 25 L x 5 mm dia (1 x 3/16″)

Weight: 45 g (1.6 oz)

The OM-EL-USB-TP-LCD standalone data logger measures and stores up to 32,510 temperature readings from the supplied thermistor probe which is attached via the socket at the base of the unit. The user can easily set-up the logging rate and start-time, and download the stored data by plugging the data logger into a PC’s USB port and running the included Windows software. Data can then be graphed, printed and exported to other applications.

The data logger features an LCD display and pushbutton which allows the user to cycle through the most recent, highest and lowest stored temperature readings. The data logger is supplied complete with a long-life lithium battery, which can typically allow logging for up to 6 months. The OM-EL-USB-TP-LCD is suitable for a wide variety of applications including high and low temperature monitoring, transportation, food processing, building and site monitoring and HVAC.

Windows software is supplied free of charge with each data logger. Easy to install and use, the control software runs under Windows XP, Vista, 7 and 8. The software is used to set-up the data logger as well as download, graph and export data to Excel. The software allows for the following parameters to be configured: logger name, temperature units (°C, °F), logging rate (1 sec, 10 sec, 30 sec, 1 min, 5 min, 30 min, 1 hr, 6 hr, 12 hr), high and low alarms, start mode (immediate, delayed and push-to-start logging), display mode (display off, on for 30 seconds after button press, or permanently on) and data rollover (allows unlimited logging periods by overwriting the oldest data when the memory is full).

Thermistor Probe

The probe supplied with the OM-EL-USB-TP-LCD uses a precision thermistor to sense the temperature. The probe length may be extended by the use of a suitable extension cable (use twisted pair with high quality 3.5 mm jack socket/plugs for best results).

SPECIFICATIONS

Probe Temperature Measurement Range: -40 to 125°C (-40 to 257°F)

Resolution (Internal and Displayed): 0.5°C (1.0°F)

Accuracy (Data Logger Error @ 25°C): ±0.1°C (±0.2°F) typical (does not include thermistor probe error)

Accuracy (Thermistor Probe): See thermistor probe accuracy charts on PDF

Operating Temperature Range (Data Logger): -10 to 40°C (-14 to 104°F)

Memory: 32,510 readings

Memory Wrap Around (Rollover): Yes (software selectable)

Logging Interval: 1 sec, 10 sec, 30 sec, 1 min, 5 min, 30 min, 1 hr, 6 hr, 12 hr

Software: Windows XP/Vista/7 and 8 (32- and 64-bit)

Alarm Thresholds: High/low alarm thresholds for temperature (software selectable)

Start Mode: Immediate, delayed and push-to-start logging (software selectable)

Status Indicators (LEDs): Red and green LEDs. The first LED flashes red to indicate that the OM-EL-USB-TP-LCD is in an alarm condition (logged temperature has exceeded a high or low alarm level). The second LED flashes green to indicate that the OM-EL-USB-TP-LCD is logging normally and is not in an alarm condition.

Power: 1/2 “AA”, 3.6V lithium battery (included)

Battery Life: 6 months typical at 25°C (77°F) (depends on sample rate, ambient temperature and LCD use)

Dimensions:

Data Logger: See dimensional drawing on PDF

Standard Thermistor Probe

  • Cable: 1 m (3′)
  • Probe Tip: Stainless steel, 25 L x 5 mm dia (1 x 3/16″)

Weight: 45 g (1.6 oz)

Would you like to know more?

Our team can help you with any product information, quotes, or any general questions you may have about the product.

Product logos in a grid

Your no.1 solution to all of your workwear needs

Putting the ‘direct’ in directory since 2009. With our global catalogue of quality safety and environmental monitoring products all under one roof, we put an end to lengthy, saturated searches. At OSE, just find and enquire and we will put you in touch with the right person to make your product purchase.

Product logos in a grid

Product Selected

Thermistor Probe Temperature Data Logger with LCD Display

Make an Enquiry

"*" indicates required fields

*
Country
Hidden
This field is for validation purposes and should be left unchanged.

In a rush? Call our team today

|

Get the newsletter - Keep up to date with Health, Safety & Environmental monitoring products from across the globe with our free newsletter