MicroMax® NS TRINE

How do you protect your harness and lanyard from damaging paints and chemicals?

MicroMax NS TRINE is a new Type 5 and 6 coverall which features a rear sleeve for your harness lanyard. This means that the harness can be worn inside the coverall and remains protected from any chemicals in the environment that might damage it or reduce its life. And the sleeve, which if unused remains neatly folded away if unused, is long enough to protect the lanyard as well as the harness.

Most importantly, testing at the SATRA fall-Arrest rig shows the coverall remains intact if the worst happens so continues to protect the wearer after a fall.

Key Features:

  • Allows harness and lanyard to be worn inside coverall.
  • Protects harness and lanyard from damaging liquids, paints and chemicals – reduces costs.
  • Lanyard sleeve folds away neatly in rear pouch when notin use.
  • Velcro fastened lanyard sleeve for easy fitting.
  • Tested at SATRA fall-arrest rig: garment remains intact when a fall incident occurs, maintaining protection for wearer. (See video – use QR code or URL below)
  • High quality microporous film laminate fabric – soft, flexible and comfortable to wear.
  • Coverall with elasticated hood, waist, wrists and ankles. Fold away lanyard sleeve to rear.
  • Improved Super-B style coverall: superior fit, wearability and durability.
  • Three-piece hood, inset sleeves and diamond crotch gusset results in best fitting garment on the market

Micromax® NS

Microporous polyethylene film laminate coverall with stitched seams. Microporous films feature a high liquid protection and dust barrier whilst allowing moisture vapour to escape through a high Moisture Vapour Transmission Rate (MVTR). MicroMAX® NS offers superior liquid and dust protection to traditional flashspun PE along with good comfort and durability.

Also available in lab coats, overshoes, sleeves etc.

Key Features:

  • Superior liquid anddust protection.
  • Soft, flexible fabric for comfort.
  • High MVTR for higher comfort level.
  • Lakeland “Super-B” style pattern–ergonomicallystyled and sized for generous fit and superior freedom of movement

MicroMAX® TS

Microporous PE film laminate coverall with stitched and taped seams. Taped seams enables certification to liquid spray (EN14605 – Type 4) and makes the garment ideal for pharmaceutical applications and for bio-hazard applications where protection against infectious agents, blood and body fluids.

Microporous film features superior liquid protection compared to more traditional flash-spun polyethylene garments.

Key Features:

  • Microporous film laminate combines superior protection with a comfortable, soft and flexible fabric
  • Stitched & tapedseams for full seal
  • Adhesive tape to front flap
  • Coverall with 3 piece hood, insetsleeves, 2 piece diamond crotch gusset, elasticated hood, waist, cuffs and ankles


MicroMAX® is lakeland premium microporous film Type 5 & 6 coverall. Unique in the world, the fabric features a nylon scrim laminated between the film and PP substrate.

This acts as a “rip-stop” and adds strength giving MicroMAX® the highest tear strength of Type 5 & 6 coveralls available. MicroMAX® also features tough and durable bound seams. The combination of fabric and seams results in a garment ideal for more demanding applications where a more durable suit is required.

Key Features:

  • Unique microporous film with nylon scrimstrengthening – highest tear strength of its type
  • Tough and durable for more demanding applications
  • Soft & flexible fabric for comfort
  • High MVTR for comfort
  • Lakeland “Super-B” style pattern –ergonomicstyling and generous size

Safegard® GP

Safegard® GP is the entry level, breathable protective coverall for protection in Type 5 and 6 applications. Excellent lightweight protection against dusts and light splashes.

Key Features:

  • Highly breathable so comfortable to wear
  • Excellent protection against dry particles and splashes of liquids
  • Lakeland Super-B style pattern –ergonomicallystyled and sized for generous fit and freedom ofmovement

Safegard® 76 Diamant

Safegard® 76 Diamant is a special version of Safegard® 76 developed to meet the requirements of the new French regulations for the asbestos abatement industry. Featuring distinctive red, tightly bound seams and Lakeland’s superior Super-B style design Safegard® 76 Diamant offers users a third alternative in the Safegard® range.

Key Features:

  • Breathable SMMS fabric for comfortable dust and light splash protection
  • Red CPE Bound seams–easy identification and meets requirements of 2013 French Asbestos Industry regulations
  • Bound seams resultsina tougher,more durable garment
  • Lakeland Super-B style garment

Safegard® 76

Safegard® 76 is Lakeland’s Premium SMS garment. A unique combination of superior fabric, superior seams and the Lakeland Super-B style style pattern results in a breathable so highly comfortable yet tough and resilient limited life coverall for Type 5 & 6 applications.

Key Features:

  • Highly breathable so comfortable to wear
  • Excellent protection against dryparticles and splashes of liquids
  • Superior and tough bound seams result inimproved protection, durability, appearance and finish
  • Lakeland “Super-B” style pattern –ergonomically styled and sized for generous fit and superior freedom of movement

MicroMAX® TS Cool Suit Advance

The unique Lakeland Cool Suit range is lakeland innovation in action. Composite suits combine protective fabrics with breathable Safeguard fabric for breathability and comfort.

Advance and Advance Plus versions offer Type 4 protection with breathability. Cool Suit Advance brings the innovative Cool Suit design to Type 4 protection. The breathable back panel is covered by a panel of MicroMAX® NS and sealed at the top and sides, leaving the generous overlap open to allow breathability. Seams are stitched and taped for a fully sealed seam.

Key Features:

  • See Safegard76 TDS for back panel information
  • Unique Type 4 sealed seam design –breathable byway of the Cool Suit covered SMS panel on the back
  • Breathable Type 4 protection
  • Lakeland Super-B style garment


MicroMAX® NS Cool Suit

The unique Lakeland Cool Suit range is Lakeland innovation in action. Composite suits combine protective fabrics with breathable Safegard fabric for breath-ability and comfort.

Advance and Advance Plus versions offer Type 4 protection with breath-ability. The MicroMAX® NS Cool Suit offers users the optimum combination of superior protection and high comfort for Type 5 & 6 applications The critical protective parts of the garment – the front, the hood, the legs and arms, are constructed of MicroMAX® NS fabric – excellent dust and liquid repellency, whilst the back panel uses blue Safegard® materials for breath-ability. This the user gets the best of both worlds. In addition seams are bound with blue CPE for added strength and protection.

Key Features:

  • Composite coverall combining excellent protection with breathable comfort
  • Bound seams for added strength and security
  • Lakeland “Super-B” style pattern for generous sizing and ergonomic fit
  • NB: The breathable panel has a lower protection factor than the rest of the garment, so Cool Suit may not be suitable in all applications




Subscribe to our newsletter now and stay up-to-date with new products collections, the latest and exclusive offers.

You must tick this box in order to submit your enquiry or survey response. By doing so you consent to this company gathering the personal data you have entered in your enquiry or survey. We will share this information with the product provider to enable them to contact you. Please refer to our privacy policy on this site for further information.

I accept the terms and conditions.

Get the newsletter - Keep up to date with Health, Safety & Environmental monitoring products from across the globe with our free newsletter