Collection: Torches

The Micro and Mini Torches use high-tech light sources to give impressive performance with a compact size, designed for easy pocket storage, and are CE marked to the ATEX directive and IECEX certified for safe use in potentially explosive gas, vapour, mist or dust atmospheres, where a T4 OR T5 temperature class permits. ALL models are approved to group I for use in mining applications.

The LED models; M-10 Micro, M-40 and M-60 Minis are approved as Category 1 equipment for use in Gas Zones 0, 1 and 2, and Dust Zones 20, 21, 21 and the M-20 Xenon Mini is approved as Category 2 equipment for use in Gas Zones 1 and 2.

The M-10 Micro has a single white 5mm ‘Nichia’ LED light source and is powered by four alkaline LR44 ‘button cells’, giving an impressive beam with a two hour duration from a very compact size. The M-20 Mini uses a Xenon filament bulb powered by two LR03 ‘AAA’ cells, giving an excellent narrow beam of light with good range and up to 2.3 hours duration. The M-40 Mini has a cluster of three white 5mm ‘Nichia’ LEDs, and the M-60 Mini uses a single high power Cree LED giving remarkable light output; both products are powered by three alkaline LR1 ‘N’ cells giving up to ten hours of usable light with the M-40 and up to 3.5 hours* of usable light with the M-60. All supplied with cells.

The Micro and Mini Torches have an ergonomic design and are constructed from high quality thermoplastic resin, with excellent impact and chemical resistance and the polycarbonate lens is set-back within the lens ring to minimise risk of damage. All models have a lanyard hole (M-10 Micro supplied with neck cord), an integral pocket clip for secure retention and to prevent roll on a flat surface, and a push-button for single-handed switching, which is shrouded to guard against accidental operation. All models are certified IP67, sealed against water/dust ingress.

IMPA Codes

79 22 76 – M-10

79 22 78 – M-40

79 22 79 – M-60

NSN codes

6230-99-1823546 – M-60MOD

Features & Benefits

• ATEX and IECEx Certified
• T4/T5 temperature class
• Ultra small size
• Lightweight, ergonomic design
• Proven impact resistance
• Single handed switching
• Switch protection shroud
• Integral pen style pocket clip
• IP67 water and dust tight
• Gas and Dust Approval (M-20 Not Dust approved)
• Group I Mining Approval

 

The Midi Torch is a compact high power LED pocket torch delivering excellent illumination, robustness and reliability in the most extreme conditions and is CE marked to the ATEX directive and IECEX certified for safe use in zones 0,1 and 2 potentially explosive gas and zones 20, 21 and 22 dust atmospheres.

With a smooth, easy grip, ergonomic enclosure and a high output LED light source, giving up to 210 lumens of light output and bespoke optics delivering a narrow high intensity beam and, at the same time, a lower output wide angle fringe light, the Midi Torch is ideal for inspection and maintenance work in conditions of darkness or reduced visibility.

The single-handed push button switch with rubberised switch cover and raised surface enable easy switching, even with gloved hands, and shrouded to avoid inadvertent operation. The strong, durable torch body enclosure has excellent chemical resistant properties and a proven impact resistance, even at sub zero temperatures. The rubber armoured lens ring gives enhanced grip and shock protection with a shatterproof polycarbonate lens providing excellent resistance to impact damage. It is sealed dust tight and protected from water immersion with an IP67 rated enclosure. The straight body configuration has an anti-roll foot allowing it to be placed securely on its base or side.

The Midi Torch has a battery duration of up to 7 hours, after which it is recommended that the user replaces the batteries to avoid the risk of battery leakage, the high power LED light source is ‘fitted for life’. The torch’s internal construction is a one-piece assembly with LED, circuit, switch and battery cassette for easy replacement of the 4 AA alkaline primary cells. Details of the specific approved AA cells for use in T4 gas atmospheres can be found in the instruction manual; all other AA alkaline primary cell types allowable for use in maximum T3 rated Zone 0 areas.

IMPA Code

79 22 80

Features & Benefits

• ATEX and IECEx certified for Zones 0 and 20 explosive gas and dust atmospheres
• 210 lumen high output LED light source
• IIC Gas Group / T3/T4 temperature class
• IIIB Dust Group / 200°C maximum surface temperature
• Midi compact size
• Compact & robust ergonomic design
• Single handed switch with switch protection shroud
• IP67 water and dust tight
• Group I M1 Mining approval
• Supplied with T4 approved cells and a wrist strap (do not attach and use wrist strap in Zone 0/20 areas or applications)

 

The ATEX Safety Torch is a reliable, simple and cost effective portable light and is available with a straight or right-angle body style and vacuum or xenon bulbs and is CE marked to the ATEX directive and IECEx certified for safe use in Zones 1 and 2 potentially explosive gas, vapour and mist atmosphere, where a T6 or T4 class permits, and Zones 21 and 22 dust atmospheres, with certified maximum surface temperatures of 65°C or 95°C.

T4 models give outstanding light output using advanced, long life xenon bulbs, set in a high quality parabolic reflector, coupled with alkaline cell approval, giving up to 12 hours of light output. Alternatively T6 allows use in any Zone 1 or 2 atmospheres, with optimum light output in this temperature class, and a 5 hour duration.

The compact torch design has a high-grip ergonomic form with easy single-handed switching, even with gloved hands. The torch body offers high strength, and proven impact resistance even at sub zero temperatures, using carefully selected thermoplastic resins with excellent chemical resistance. Additionally, the rubber armoured lens ring and end cap give enhanced grip and shock protection. The lens is scratch and chemical resistant.

The torch is sealed dust tight and protected from water immersion, with a certified IP67 enclosure. Right angle models incorporate a replaceable high strength thermoplastic belt clip for hands free use. Both models allow straightforward battery and bulb replacement, a spare bulb is fitted in the bulbholder for quick and convenient replacement. All models are supplied with wrist straps and clip rings.

IMPA Codes

79 22 61 – TS-26, 79 22 62 – TR-26

79 22 63 – TS-24, 79 22 64 – TR-24

Features & Benefits

• T6 and T4 models
• Simple, robust design
• Ultimate light output
• High energy alkaline cell certified
• ATEX explosive gas and dust approval
• IECEx Scheme certified

 

The Wolf ATEX Safety Torch with LED is an ATEX and IECEX certified primary cell led safety torch using the latest technology to give excellent performance, robustness and reliability for safe use in zones 1 and 2 potentially explosive gas and zones 21 and 22 dust atmospheres (TR/TS-30+). A zone 0 and zone 20 version is available (TR/TS-35+). Group I approval for use in mining applications.

This high strength torch, available with a straight or right angle body, is extremely robust and reliable, with proven shock protection, even at sub zero temperatures, rubber armoured lens ring and end cap, scratch and chemical attack resistance lens – all sealed dust tight and protected from water immersion, with an IP67 enclosure.

The compact, lightweight and ergonomic torch body gives enhanced grip and comfort for the user with easy single-handed switching, even with gloved hands, plus the replaceable high strength clip (on the right angle model only) allows for hands free use. Supplied as standard with wrist strap and clip ring.

Its unique optics deliver a piercing white spot beam combined with a wide-angle flood of fringe light from a high power ‘fitted for life’ LED giving a peak of up to 130 lumens light output. Two D/LR20 primary alkaline cells provide a light duration of up to 17 hours. With a low battery power indicator allows a user to monitor the state of battery charge, a red flashing light is emitted through the side of the torch body while battery power and light output is high, but switching to continuous red when battery and light output is low, warning battery replacement is required.

NSN Codes

6230-99-2262040 – TR-35+MOD

Features & Benefits

• ATEX and IECEx certified for Zones 1 and 21, Zones 0 and 20 version available, explosive gas and dust atmospheres
• High power ‘fitted for life’ LED for outstanding light output, no bulb replacement required
• Medium spot beam with wide-angle flood of fringe light
• Compact and lightweight ergonomic torch design, straight and right-angle versions
• Up to 130 lumens light output with up to 17 hours duration
• 2 x 1.5V D/LR20 primary cells with low power indicator
• Supplied with wrist strap and clip ring
• Very low maintenance, quick and easy parts replacement
• Group I Mining Approval

 

The Wolf Rechargeable Torch is an ATEX and IECEX certified rechargeable right angle safety torch, using the latest technology to give excellent performance, robustness and reliability for safe use in zones 1 and 2 potentially explosive gas and 21 and 22 dust atmospheres (R-50). zones 0 and 20 version available (R-55).

This high strength right-angle torch is extremely robust and reliable, with proven shock protection, even at sub zero temperatures, rubber armoured lens ring and end cap, scratch and chemical attack resistance lens, with a certified IP67 enclosure. The compact, lightweight and ergonomic torch body gives enhanced grip and comfort for the user with easy single-handed switching, even with gloved hands, plus the replaceable high strength clip allows for hands free use.

Unique optics deliver a piercing beam of outstanding light from a high power LED, and using the latest rechargeable battery technology provides a light duration of up to 6.5hrs on low power and 3.5hrs on high power. The low battery power indicator allows a user to monitor the state of battery charge as it diminishes, a bar of high intensity red LEDs go out and finally the beam flashes repeatedly, warning recharging is required. Plus its emergency function illuminates the torch if power to the charger is cut to provide standby escape lighting. Optional primary cell cassette is available for back-up power.

The torch is low maintenance with quick and easy parts replacement, a full spares service is offered for all internal/external fittings, and the LED light source is expected to last the product’s lifetime. Vehicle and mains voltage charger options offer a rapid recharge time of only 1.5hrs for 90% capacity, plus the mountable ‘quick’ charger is configured as a torch holder, with ‘snap in/snatch out’ function, for quick release but secure retention.

IMPA Codes

79 22 67 – R-50, 79 22 68 – R-55

79 22 72 – R-50H, 79 22 73 – R-55H

Features & Benefits

• ATEX and IECEx certified for Zones 1 and 21, plus Zones 0 and 20 version available
• High power LED for outstanding light output
• Compact and lightweight ergonomic torch design
• Two power levels of light output give up to 6.5 hours light duration
• Rechargeable battery with low power indicator
• Supplied with wrist strap and clip ring
• Emergency illumination function
• Mains and vehicle charger options
• Suitable for cyclic and short and long term standby applications
• Very low maintenance, quick and easy parts replacement