Superior Touch® 13-Gauge Polyester Knit with Polyurethane Palms

  • Fine-gauge polyester is highly touch-sensitive and non-linting
  • Polyurethane coating provides great grip and low-particulate shed
  • Great for fine assembly and where contamination is a concern
  • Excellent value for a glove of this quality
  • Snug fitting for all day comfort and dexterity

TenActiv™ Composite-Knit Cut-Resistant Glove with Reinforced Thumb and Micropore Nitrile Grip

  • TenActiv™/HPPE/steel/composite filament fiber blend provides excellent cut resistance
  • Micropore nitrile coating does not absorb oils andiquids so hands stay dry
  • Craters act like tiny suction cups to improve grip in wet and oily conditions
  • Contains spandex in its composition for impressive comfort and tactile sensitivity
  • High abrasion resistance along with comfort and dexterity
  • Nitrile thumb crotch reinforcement to reduce wear in critical areas

Superior Touch® 13-Gauge Knit With Dyneema® and Foam Nitrile Palms

  • Speckled grey 13-gauge gloves are knit with lint-free, continuous-filament Dyneema®
  • To increase grip and add some puncture resistance, we coated the palms with foam nitrile
  • Foam nitrile improves grip by absorbing and displacing liquids and oils on smooth objects
  • Gloves are washable and can be bleached, at cold temperatures only. (104°F/40°C)

Dyneema® is a registered trademark of Royal DSM N.V.

Superior Touch® Grey 13-Gauge Cut-Resistant Glove Made With Dyneema®

  • Polyurethane palm coating is excellent for a ‘tacky’ grip in dry conditions
  • Lint-free continuous filament yarn
  • High dexterity and flexibility
  • Gloves are washable and can be bleached, at cold temperatures only. (104°F/40°C)

“From the standpoint of people liking the glove, Superior makes the best glove for production I have ever seen. I don’t receive complaints out of the glove.” – Tyrone S., EHS Tech, Trane

Dyneema® is a registered trademark of Royal DSM N.V.

Dexterity® Nitrile Palm-Coated Cut-Resistant String-Knit Glove

  • 13-gauge high-dexterity knit is lightweight and comfortable
  • Composite blend of Kevlar® wrapped around compositefllament fiber provides ANSI level A4 cut protection
  • Foam nitrile coating provides good grip for lightly oiled parts

Kevlar® is a registered trademark of E.I. du Pont de Nemours and Company

TenActiv™ Anti-Impact Hi-Viz Glove with Micropore Nitrile Grip

  • Impact-resistant back-of-hand protection safeguards against knocks and bumps without impeding flexibility or dexterity
  • Made with 13-gauge TenActiv™ for excellent cut protection
  • Hi-viz knit shell increases worker visibility on the job
  • Thermoplastic rubber (TPR) backing protects hands from knocks and bumps
  • Micropore nitrile coating provides excellent grip by displacing oil on slippery surfaces

“I tried your STAGYPNVB – Tenactiv™ impact protection gloves today for the first time. I’m very impressed. The fit good, dexterity is quite good, grip is improved over many gloves. I used them when I was lock-wiring and they helped quite a lot preforming this task. Hand tools are easy to use while wearing these gloves and they are not too hot. I will be buying these for use at our site in the future. Thank you.” – Jordan B. | Engine Operator, MDS AeroTest

Emerald CX® 13-Gauge Cut-Resistant Waterproof Gloves

  • Blend of Kevlar® and Wire-Core™ steel for high cut protection
  • Fully coated makes glove waterproof
  • Micropore nitrile coating gives excellent “suction” grip in wet/oily conditions
  • High abrasion resistance along with great comfort and dexterity

Dexterity® Deluxe 18-Gauge Flame-Resistant Arc Flash Gloves with Neoprene Palms

  • The world’s thinnest, most comfortable arc flash level 3 rated glove
  • Arc flash tested for level 3 with an ATPV of 25 cal/cm²
  • 18 g Kevlar® composite filament fiber shell of protection
  • Dual cut protection; Glove body – ANSI cut level A3; Cuff only – ANSI cut level A6
  • Flame-resistant neoprene palm coating for better grip
  • ESD (electrostatic dissipating) carbon filament to impart anti-static properties

TenActiv™ 18-Gauge High-Dexterity Cut-Resistant Glove With Foam Nitrile Palms

Introducing the world’s first 18-gauge ANSI cut-level A4 work glove with 1617 grams of cut protection.

  • Fine, bare hand feel
  • Foam nitrile palm for excellent grip
  • Silicone free
  • High-strength fiber is incorporated in a way that it cannot come through to the hand for total comfort and extended glove life
  • TenActiv™ gloves feature lint-free, continuous filament yarn that is stronger than steel on an equal-weight basis
  • These gloves are treated with Ultra-Fresh to achieve 99.9% antimicrobial status
  • Touchscreen compatible
  • Specifically designed for electrostatic dissipative (ESD) properties when working with micro-electronic work

Also available with 3/4 foam nitrile back (#S18TAFGFNF).

“I received a pair of these gloves as a sample and I use them regularly. They have saved my hands from box-knife cuts on more than one occasion. What I like most, other than the protection they afford, is their feel. These are really comfortable gloves to wear and still allow fine hand dexterity.” Dave W, Advanced Research & Development Specialist. Geotech Ltd.

“I like the customer care Superior Glove has with their customers. This is why I am switching to Superior Glove for all of our gloves.”Customer, (ATI Metals).

Dexterity® Fleece-Lined Nylon Gloves with Latex Palm

  • Thick latex crinkle-finish provides superior wet/dry grip
  • Seamless construction and shaped to the hand for greater comfort
  • High-visibility neon yellow for increased worker safety
  • Gloves are dipped over an ergonomic hand form for greater comfort and less hand fatigue


Subscribe to our newsletter now and stay up-to-date with new products collections, the latest and exclusive offers.

You must tick this box in order to submit your enquiry or survey response. By doing so you consent to this company gathering the personal data you have entered in your enquiry or survey. We will share this information with the product provider to enable them to contact you. Please refer to our privacy policy on this site for further information.

I accept the terms and conditions.

Get the newsletter - Keep up to date with Health, Safety & Environmental monitoring products from across the globe with our free newsletter