For the continuous detection of flammable gases in explosion hazardous areas featuring a UL Class 1, Div. 1 flame proof housing.
Key Features
- Self diagnosis function with built-in Microprocessor
- Detection gas from low to high concentration owing to various detection principle
- Stable quality and field proven detection principle for service life
- Built-in backlight LCD or OLED display
- Easy Configuration of monitoring by HART communication
- Auto calibration and program setting with a magnet bar
- 4-20mA (Current source or Sink) output signal
- With the alarm unit – Normal : Green LED – Alarm : Red LED, Buzzer(95 dB) – Trouble : Yellow LED
- Easily calibrated by one person
The DOD64 FTIR is a Flexible 16 to 64 Point Sequential FTIR Monitor that provides field proven FTIR Technology for the quick detection of low level toxic, corrosive and combustible gases.
The DOD64 FTIR Gas Monitor offers a unique solution to todays environmental monitoring needs. This system is integrat- ed with all new state of the art controls and HMI systems. The DOD64 FTIR new multipoint system makes FTIR monitoring more affordable per point and simplifies the operations through a well thought out, customer driven innovative engineering approach.
This new innovative gas detection system enables customers to experience advanced technology at a lower initial investment and reduced cost of ownership.
The ChemLogic 96 Point Continuous Monitor provides field proven ChemLogic Technology for the quick detection of low level toxic and corrosive gases
The CL96 is the next generation of interference free, low maintenance colorimetric gas detection. This system is easy to install and utilizes 1/4″ tubing to allow for easy upgrades of obsolete sample draw systems. Simply plug in your existing 1/4″ sample tubing and you’re ready to go. This new innovative gas detection system enables customers to experience advanced technology at a lower intial investment and reduced cost of ownership.
The PS-7 is a low cost state of the art sample draw gas detection system. Optional device net digital communication is available. Light weight, easy to install and maintain. Snap in smart sensors and control gives you the flexibility to switch from gas to gas in seconds.
Gases Detected:
Acetone (C3H60)
Acetonitrile (CH3CN)
Acetylene (C2H2)
Ammonia (NH3)
Arsine (AsH3)
Benzene (C6H6)
Butadiene (C4H6)
Carbon Monoxide (CO)
Chlorine (Cl2)
Chloroform (CHCl3)
Chlorodifluoromethane R22 (CHClF2)
Diborane (B2H6)
Dichlorosilane (SiH2Cl2)
Difluoromethane (CH2F2)
Dimethylamine (CH3)2NH
Disilane (Si2H6)
Ethanol (C2H60)
Ethylene (C2H4)
Ethylene Oxide EtO (C2H4O)
Fluorine (F2)
Formaldehyde (CH2O)
Gasoline (C8H18)
Germane (GeH4)
Hexafluorobutadiene (C4F6)
Hexane (C6H14)
Hydrogen (H2)
Hydrogen Bromide (HBr)
Hydrogen Chloride (HCl)
Hydrogen Fluoride (HF)
Hydrogen Selenide (H2Se)
Hydrogen Sulfide (H2S)
Isobutene (C4H8)
Isopropyl Alcohol – IPA (C3H8O)
Methane (CH4)
Methanol (CH3OH)
Methyl Bromide (CH3Br)
Methyl Ethyl Ketone – MEK CH3C(O)CH2CH3
Methyl Fluoride R41 (CH3F)
Methyl Formate (C2H4O2)
Methyl Pyrolidinoner NMP (C5H9NO)
Methylene Chloride (CH2Cl2)
Nitric Oxide (NO)
Nitrogen Dioxide (NO2)
Nitrogen Trifloride (NF3)
Oxygen (O2)
Ozone (O3)
Phosphine (PH3)
Phosphorous Trifluoride (PF3)
Propane LPG (C3H8)
Propelyene (C3H6)
Silane (SiH4)
Sulfur Dioxide (SO2)
Trans LC
Trifluoromethane- R23 (CHF3)
Vinyl Chloride (H2CCHCl)
Xylene (C6H4C2H6)
The ChemLogic Single Point Continuous gas detection monitor provides field-proven ChemLogic Technology in a NEMA 4X enclosure for the quick detection of low-level toxic and corrosive gases.
The CL1 is the next generation of interference free, low maintenance colorimetric gas detection. This system is simple to install and utilises 1/4″ OD X 3/16″ ID tubing to allow the sample to be drawn up to 150 feet.
The innovative CL1 provides relay and analog outputs along with the ability to data log events via a flash card. Customers experience advanced technology at a lower initial investment and reduced cost of ownership.
Search
Menu