The economical answer for quick, modular and free standing interior and exterior demarcation.
Simple Modular Design
When a quick demarcation is needed, the KEE MARK system is the perfect solution. Kee Safety’s high visibility, maintenance free demarcation system is ideal for providing demarcation around plant, equipment and fragile materials or as an economical solution to guardrail, providing it is placed at least 2m from the roof edge.
The system is compact making it portable and easy to assemble. The unique post design with a heavy duty PVC base weighing 25kg prevents the system from falling during severe weather conditions. The KEE MARK demarcation system is further enhanced by a high visibility, two colour, polyurethane chain which links between the support posts.
- High visibility demarcation system
- Cost-effective
- Quick and easy to install
- Durable, maintenance free system
- Compact design provides ease of transportation and storage
Safe environment for all working on a roof
One of the HSE recommendations in reducing risk taken by people working on a roof is to select and use the right rooftop safety equipment. For contractors and engineers accessing flat roofs to carry out essential building, repair and maintenance work, safety guardrailing afforded by collective roof edge protection system can make a major contribution to minimising danger. The collective system that is selected must meet the highest safety standards. Our KeeGuard® rooftop guardrail system is fully tested and meets or exceeds current rooftop safety requirements. Not all free standing roof edge protection systems offer this level of security of rooftop areas.
KeeGuard® is a modular free standing rooftop guardrail system which does not penetrate the roof membrane. The system works on a proven counterweight system, recycled PVC weights provide high visibility, non-slip secure base that does not penetrate the roof membrane. Galvanised fittings and tube deliver collective protection which ensures a safe working environment for anyone working on a roof.
The KeeGuard® roof edge protection system offers maximum flexibility for most rooftop configurations, almost any flat roof up to 10 degrees can be accommodated. The system is available for different roof types, either for use where a restraining wall such as a parapet is in place or where the rooftop is completely open around the perimeter. The KeeGuard® rooftop guardrail system can be used for retrofitting to older buildings as well as for new constructions.
The KeeGuard® systems is also available in a lightweight aluminium version.
There is also available a newly launched KeeGuard® Foldshield folding version and a unique, fixed roof edge protection system named KeeGuard® Topfix especially designed for standing seam metal roofs.
A simple and cost effective rooftop safety system
- Provides collective protection for all working on a roof
- Works on a proven counterbalance system
- No penetration of the roof membrane
- Minimum components for ease of installation
- Unique open style fitting allows quick installation of horizontal rails
- No welding, threading or bolting required on site
- Suitable for use on concrete, asphalt, PVC membrane and felt roof surfaces
- Modular design allows reconfiguration on site if needed
- Sections can be added to or taken down, for reconstruction elsewhere
- Compatible with almost all configurations of flat roofs up to 10 degrees slope
Setting the rooftop safety standards
- EN ISO 14122 Part 3
- EN 13374 Class A
- HSG-33 Health & Safety in Roof Work
- HSE INDG 284 “Working on roofs”
- BS 6399: Part 2 1995 Wind Code
- AS 1657 : 2018
- Wind loading in accordance with AS/NZS 1170.2
Design & installation service
Kee Safety offers a full design and installation service. We can undertake surveys and produce CAD drawings for your project. If you are interested in our services, please contact us.
- Technical advice and support
- Site inspection service
- Design solutions in CAD
- Installation service
KEE MODULES is a range of pre-designed upright assemblies to enable the quick specification and installation of EN14122 part 3 compliant structurally
mounted roof edge protection.
KEE MODULES are available in size 7 (42.4 mm) size and 8 (48.3 mm) Galvanised Steel or Aluminium. The standard configurations offer side fixing, top fixing or a fitting to enable mounting underneath aluminium copings.
Handrails can be in line or offset, with single or double rails and the Uprights can be supplied straight, inclined or radiused.
Features
- Galvanised steel or aluminium
- Adaptable to many roof configurations
- Multiple variations
- Conform to EN ISO 14122 pt3
- No threading, welding or riveting required.
Benefits
- Pre-assembled uprights for quicker installation
- No welding, no hot work permits required
- Can be adjusted on site to suit local conditions
- Fittings don’t damage any protective coatings applied to the tube
- Assured design loads
- Consistent appearance
- Easily installed by lower skilled and therefore less expensive labour.
Falls from height are a major cause of accidents and unfortunately falls through skylights happen so often. All building owners have a duty of care to ensure workers who need to access a roof are safe.
KEE COVER skylight cover has been specifically designed to provide an effective solution for covering unprotected roof lights without blocking out the light they are supposed to let into a building.
Design
KEE COVER provides protection against falls through fragile roof lights. Skylights are covered by a strong mesh panel mounted onto a metal frame. KEE COVER has been designed specifically for metal profile roofs where inline roof level skylights are common.
The mesh panel top sits onto a metal frame made from KEE KLAMP fittings and tube. The standard mesh panels are 2m long and 1m wide. For larger roof lights we offer extension panels, either 2m or 1m long x 1m wide.
The KEE COVER is designed to be assembled in-situ so is delivered in component form, thus making it easier to get up to roof level.
KEE COVER roof lights covers are available in two formats.
Standard Panels
Standard Panel fixes virtually flat to the roof surface.
Raised Panels
Raised Panel is raised above the skylight which is mounted on small legs to give a greater distance between the mesh panel and the roof light. In the event of a fall this would help ensure the roof light is not damaged when the KEE COVER absorbs the impact.
Testing
KEE COVER roof light covers have been tested to the Class B criteria and loadings required in the ACR Red Book Test for Non-Fragility of Roof Assemblies. An additional 1200 joule test has been carried out to BS EN 1873. KEE COVER meets both of these test criteria.
Features and Benefits
- Safety solution for covering roof lights on trapezoidal and standing seam roofs
- Tested in accordance with the ACR Red Book
- Easily assembled and fitted while on the roof
- All components and mesh panels are hot dip galvanised for enhanced durability
- Mesh panels do not block out light, keeping the building illuminated
- Extension panels allow for extended width and lengths be covered, ensuring the roof surface is safe
- Metal frame and panels will not go brittle thus delivering longevity for the installation
- Variable height facility allows for use over different shaped roof lights
- Tube can be colour coated if greater visibility is required
KEEGUARD PREMIUM offers a new and innovative approach to freestanding, non-penetrative roof top railing systems. The unique base weights eliminate the need for off-set counterweights, with only ‘Open ended’ systems utilising returns at each end of a run to minimise movement. KEEGUARD PREMIUM is suitable for both temporary and permanent applications on roofs of up to 10 degree pitch. The system provides the ideal fall protection solution for areas where traditional counterweights are unsuitable or potential trip hazards are a concern.
KEEGUARD PREMIUM incorporates unique 2-part interlocking recycled PVC base weights, which can be split to allow carrying by a single person or can easily be carried complete by two workers using the comfortable moulded handles. Pre-assembled uprights, 48.3 dia. tube and KEE KLAMP fittings are easily and quickly assembled to provide a solid guardrail solution. The design of the base weights also allows for toe-boards to be easily slotted into place if required.
KEEGUARD PREMIUM guardrail can also be used in combination with standard KEEGUARD where the counterbalance will not fit in with existing roof equipment.
In addition to roof edge protection KEEGUARD PREMIUM makes a great solution for temporary worker protection for ground based railing situations.
Versatile, Easy to Assemble
Pre-built 1100mm high uprights feature open cup fittings for quick and easy assembly.
The uprights are secured in the recycled PVC base weights by galvanised steel collars and set screws allowing variable angle changes of direction, which, in combination with KEE KLAMP fittings make the system solid. Assembly is easy, using an extended hex key drive with a ratchet spanner or battery hand drill.
KEEGUARD PREMIUM allows bay sizes between uprights of up to 3m with 2.2m returns required at each end of the system on open ended systems.
All the 48.3mm dia. railing and uprights are hot dip galvanised to EN ISO 1461 as standard for long term corrosion resistance. Powder Coating in Safety Yellow over the galvanised finish is available as an optional extra.
Each 2 part base weight assembly is moulded from recycled PVC in two interlocking halves. Overall dimensions are 550mm square x 161mm deep and weigh a minimum 40 KG. The base weights incorporate comfortable carrying handles and slots for an optional toe board if required. Their inter-locking design also allows the weights to be stacked for easy storage and transport.