EVOLite® Skyworker™ Industrial Working At Height Helmet – Black

EVOLite® Skyworker™ Industrial Working At Height Safety Helmet

The EVOLite® Skyworker™ helmet has a suspension system and shell structure that has been designed to be used for industrial, mountaineering, rescue and leisure activities. Meeting the EN12492 standard. A helmet complying to the mountaineering standard is impact tested with two 5kg strikers. A hemispherical striker is dropped from 2 metres onto the crown of the helmet and a flat striker from 500mm on to the front, rear or side by tilting the headform to 30°. In all cases, the transmitted force through the neck of the headform must not exceed 10kN. Two penetration tests with a 3kg pointed striker are also performed within a 50mm radius of the helmet’s crown without making contact with the headform.

Strong Light Shell
Conforms to the mandatory shock absorption and penetration requirements of EN397 industrial standard.

E.P.S Liner
Side, front and rear impact protection from the shock absorbing E.P.S liner.

4-Point Chinstrap
Fully adjustable 4-point chinstrap with quick release buckle.

Impact Protection
Side, front and rear impact protection from the shock absorbing E.P.S liner. The liner is vented to increase comfort whilst maintaining a high protection factor.

Supreme Comfort
A 6-point Terylene harness system & Chamlon™ sweat band. Revolution® wheel ratchet and 3D adjustment and a vented shell to reduce heat within the helmet.

Accessories
A universal attachment slot enables firm fitting of a range of Surefit™ safety visors, and ear defenders.

Branding
Extra large area for logos on the front, sides, and rear.

CR2 Reflective
CR2 Reflectivity, high intensity class R2 reflective material option available to provide extra safety when working in low-light conditions. CR2 Reflectives sold separately.

EVOLite® Skyworker™ Industrial Working At Height Helmet – Blue

EVOLite® Skyworker™ Industrial Working At Height Safety Helmet

The EVOLite® Skyworker™ helmet has a suspension system and shell structure that has been designed to be used for industrial, mountaineering, rescue and leisure activities. Meeting the EN12492 standard. A helmet complying to the mountaineering standard is impact tested with two 5kg strikers. A hemispherical striker is dropped from 2 metres onto the crown of the helmet and a flat striker from 500mm on to the front, rear or side by tilting the headform to 30°. In all cases, the transmitted force through the neck of the headform must not exceed 10kN. Two penetration tests with a 3kg pointed striker are also performed within a 50mm radius of the helmet’s crown without making contact with the headform.

Strong Light Shell
Conforms to the mandatory shock absorption and penetration requirements of EN397 industrial standard.

E.P.S Liner
Side, front and rear impact protection from the shock absorbing E.P.S liner.

4-Point Chinstrap
Fully adjustable 4-point chinstrap with quick release buckle.

Impact Protection
Side, front and rear impact protection from the shock absorbing E.P.S liner. The liner is vented to increase comfort whilst maintaining a high protection factor.

Supreme Comfort
A 6-point Terylene harness system & Chamlon™ sweat band. Revolution® wheel ratchet and 3D adjustment and a vented shell to reduce heat within the helmet.

Accessories
A universal attachment slot enables firm fitting of a range of Surefit™ safety visors, and ear defenders.

Branding
Extra large area for logos on the front, sides, and rear.

CR2 Reflective
CR2 Reflectivity, high intensity class R2 reflective material option available to provide extra safety when working in low-light conditions. CR2 Reflectives sold separately.

EVOLite® Skyworker™ Industrial Working At Height Helmet – Green

EVOLite® Skyworker™ Industrial Working At Height Safety Helmet

The EVOLite® Skyworker™ helmet has a suspension system and shell structure that has been designed to be used for industrial, mountaineering, rescue and leisure activities. Meeting the EN12492 standard. A helmet complying to the mountaineering standard is impact tested with two 5kg strikers. A hemispherical striker is dropped from 2 metres onto the crown of the helmet and a flat striker from 500mm on to the front, rear or side by tilting the headform to 30°. In all cases, the transmitted force through the neck of the headform must not exceed 10kN. Two penetration tests with a 3kg pointed striker are also performed within a 50mm radius of the helmet’s crown without making contact with the headform.

Strong Light Shell
Conforms to the mandatory shock absorption and penetration requirements of EN397 industrial standard.

E.P.S Liner
Side, front and rear impact protection from the shock absorbing E.P.S liner.

4-Point Chinstrap
Fully adjustable 4-point chinstrap with quick release buckle.

Impact Protection
Side, front and rear impact protection from the shock absorbing E.P.S liner. The liner is vented to increase comfort whilst maintaining a high protection factor.

Supreme Comfort
A 6-point Terylene harness system & Chamlon™ sweat band. Revolution® wheel ratchet and 3D adjustment and a vented shell to reduce heat within the helmet.

Accessories
A universal attachment slot enables firm fitting of a range of Surefit™ safety visors, and ear defenders.

Branding
Extra large area for logos on the front, sides, and rear.

CR2 Reflective
CR2 Reflectivity, high intensity class R2 reflective material option available to provide extra safety when working in low-light conditions. CR2 Reflectives sold separately.

EVOLite® Skyworker™ Industrial Working At Height Helmet – Yellow

EVOLite® Skyworker™ Industrial Working At Height Safety Helmet

The EVOLite® Skyworker™ helmet has a suspension system and shell structure that has been designed to be used for industrial, mountaineering, rescue and leisure activities. Meeting the EN12492 standard. A helmet complying to the mountaineering standard is impact tested with two 5kg strikers. A hemispherical striker is dropped from 2 metres onto the crown of the helmet and a flat striker from 500mm on to the front, rear or side by tilting the headform to 30°. In all cases, the transmitted force through the neck of the headform must not exceed 10kN. Two penetration tests with a 3kg pointed striker are also performed within a 50mm radius of the helmet’s crown without making contact with the headform.

Strong Light Shell
Conforms to the mandatory shock absorption and penetration requirements of EN397 industrial standard.

E.P.S Liner
Side, front and rear impact protection from the shock absorbing E.P.S liner.

4-Point Chinstrap
Fully adjustable 4-point chinstrap with quick release buckle.

Impact Protection
Side, front and rear impact protection from the shock absorbing E.P.S liner. The liner is vented to increase comfort whilst maintaining a high protection factor.

Supreme Comfort
A 6-point Terylene harness system & Chamlon™ sweat band. Revolution® wheel ratchet and 3D adjustment and a vented shell to reduce heat within the helmet.

Accessories
A universal attachment slot enables firm fitting of a range of Surefit™ safety visors, and ear defenders.

Branding
Extra large area for logos on the front, sides, and rear.

CR2 Reflective
CR2 Reflectivity, high intensity class R2 reflective material option available to provide extra safety when working in low-light conditions. CR2 Reflectives sold separately.

EVOLite® Skyworker™ Industrial Working At Height Helmet – Red

EVOLite® Skyworker™ Industrial Working At Height Safety Helmet

The EVOLite® Skyworker™ helmet has a suspension system and shell structure that has been designed to be used for industrial, mountaineering, rescue and leisure activities. Meeting the EN12492 standard. A helmet complying to the mountaineering standard is impact tested with two 5kg strikers. A hemispherical striker is dropped from 2 metres onto the crown of the helmet and a flat striker from 500mm on to the front, rear or side by tilting the headform to 30°. In all cases, the transmitted force through the neck of the headform must not exceed 10kN. Two penetration tests with a 3kg pointed striker are also performed within a 50mm radius of the helmet’s crown without making contact with the headform.

Strong Light Shell
Conforms to the mandatory shock absorption and penetration requirements of EN397 industrial standard.

E.P.S Liner
Side, front and rear impact protection from the shock absorbing E.P.S liner.

4-Point Chinstrap
Fully adjustable 4-point chinstrap with quick release buckle.

Impact Protection
Side, front and rear impact protection from the shock absorbing E.P.S liner. The liner is vented to increase comfort whilst maintaining a high protection factor.

Supreme Comfort
A 6-point Terylene harness system & Chamlon™ sweat band. Revolution® wheel ratchet and 3D adjustment and a vented shell to reduce heat within the helmet.

Accessories
A universal attachment slot enables firm fitting of a range of Surefit™ safety visors, and ear defenders.

Branding
Extra large area for logos on the front, sides, and rear.

CR2 Reflective
CR2 Reflectivity, high intensity class R2 reflective material option available to provide extra safety when working in low-light conditions. CR2 Reflectives sold separately.

EVOLite® Skyworker™ Industrial Working At Height Helmet – Orange

EVOLite® Skyworker™ Industrial Working At Height Safety Helmet

The EVOLite® Skyworker™ helmet has a suspension system and shell structure that has been designed to be used for industrial, mountaineering, rescue and leisure activities. Meeting the EN12492 standard. A helmet complying to the mountaineering standard is impact tested with two 5kg strikers. A hemispherical striker is dropped from 2 metres onto the crown of the helmet and a flat striker from 500mm on to the front, rear or side by tilting the headform to 30°. In all cases, the transmitted force through the neck of the headform must not exceed 10kN. Two penetration tests with a 3kg pointed striker are also performed within a 50mm radius of the helmet’s crown without making contact with the headform.

Strong Light Shell
Conforms to the mandatory shock absorption and penetration requirements of EN397 industrial standard.

E.P.S Liner
Side, front and rear impact protection from the shock absorbing E.P.S liner.

4-Point Chinstrap
Fully adjustable 4-point chinstrap with quick release buckle.

Impact Protection
Side, front and rear impact protection from the shock absorbing E.P.S liner. The liner is vented to increase comfort whilst maintaining a high protection factor.

Supreme Comfort
A 6-point Terylene harness system & Chamlon™ sweat band. Revolution® wheel ratchet and 3D adjustment and a vented shell to reduce heat within the helmet.

Accessories
A universal attachment slot enables firm fitting of a range of Surefit™ safety visors, and ear defenders.

Branding
Extra large area for logos on the front, sides, and rear.

CR2 Reflective
CR2 Reflectivity, high intensity class R2 reflective material option available to provide extra safety when working in low-light conditions. CR2 Reflectives sold separately.

EVOLite® Skyworker™ Industrial Working At Height Helmet – White

EVOLite® Skyworker™ Industrial Working At Height Safety Helmet

The EVOLite® Skyworker™ helmet has a suspension system and shell structure that has been designed to be used for industrial, mountaineering, rescue and leisure activities. Meeting the EN12492 standard. A helmet complying to the mountaineering standard is impact tested with two 5kg strikers. A hemispherical striker is dropped from 2 metres onto the crown of the helmet and a flat striker from 500mm on to the front, rear or side by tilting the headform to 30°. In all cases, the transmitted force through the neck of the headform must not exceed 10kN. Two penetration tests with a 3kg pointed striker are also performed within a 50mm radius of the helmet’s crown without making contact with the headform.

Strong Light Shell
Conforms to the mandatory shock absorption and penetration requirements of EN397 industrial standard.

E.P.S Liner
Side, front and rear impact protection from the shock absorbing E.P.S liner.

4-Point Chinstrap
Fully adjustable 4-point chinstrap with quick release buckle.

Impact Protection
Side, front and rear impact protection from the shock absorbing E.P.S liner. The liner is vented to increase comfort whilst maintaining a high protection factor.

Supreme Comfort
A 6-point Terylene harness system & Chamlon™ sweat band. Revolution® wheel ratchet and 3D adjustment and a vented shell to reduce heat within the helmet.

Accessories
A universal attachment slot enables firm fitting of a range of Surefit™ safety visors, and ear defenders.

Branding
Extra large area for logos on the front, sides, and rear.

CR2 Reflective
CR2 Reflectivity, high intensity class R2 reflective material option available to provide extra safety when working in low-light conditions. CR2 Reflectives sold separately.

Subscribe

Subscribe to our newsletter now and stay up-to-date with new products collections, the latest and exclusive offers.

You must tick this box in order to submit your enquiry or survey response. By doing so you consent to this company gathering the personal data you have entered in your enquiry or survey. We will share this information with the product provider to enable them to contact you. Please refer to our privacy policy on this site for further information.

I accept the terms and conditions.


Get the newsletter - Keep up to date with Health, Safety & Environmental monitoring products from across the globe with our free newsletter