Collection: Clean Air Air Line Systems

CleanAIR® Pressure ARES II can regulate the amount of air coming from a central compressed air distribution system or a compressor and keeps it at a constant level regardless of any changes of inlet pressure. This system is compatible only with the leather welding hood.

Areas of application

• Welding, grinding, surface finishing operations
• Dusty industrial environments
• Automotive and shipbuilding industry
• Constructions and food processing industry

 

^{Ideal solution for workplaces with the possibility of connecting to a central compressed air distribution system or a compressor.}

The filter station provides additional filtration of compressed air everywhere the quality of the supplied air does not reach the requirements of regulation EN 12021. The high capacity combined filter inside the conditioner removes solid particles, oil mist and unpleasant odours that can be present in the compressed air distribution system. The conditioner can supply sufficient amount of filtered air for two workers at the same time.

^{The highest level of protection for particularly toxic environments.}

The CleanAIR® Pressure for Mask is comfortable and versatile, highly effective constant flow airline system for use with the Shigematsu GX02 mask. The unique filter back up feature allows the user to keep breathing normally through the passive particle or combined filter in case of sudden failure of the air supply and provides breathing protection in case of emergency evacuation. The system allows the user to adjust the airflow from 170 lpm up to 250 lpm and keeps it at constant level regardless to changes of inlet pressure. In addition to the airflow regulation (170 – 250 lpm) the system is equipped with a warning whistle. It warns the user if the inlet pressure drops below the bottom limit of operating pressure (350 kPa). CleanAIR® Pressure for Mask was especially designed for long wearing periods or for workplaces where the contaminants are highly toxic and have poor warning properties. It is decontaminable by shower and it provides the maximum nominal protection factor of 2000 in accordance with EN 14594:05 (class 4B).

Solution for workplaces with the possibility of connection to a central compressed air distribution system or a compressor.

Basic version CleanAIR® Pressure which can regulate the amount of the supplied air and keeps it on a constant level regardless to any changes of inlet pressure.

Solutions for compressed air

CleanAIR® Pressure Flow Master systems create a constant airflow in hoods and masks and are therefore suitable for long-term work in the heaviest industrial environments. The regulator on the belt unit can adjust the amount of air coming from the central compressed air distribution system or a compressor and keeps it at a constant level without regard to the changes of inlet pressure.