The Dräger X-plore® 6570 is the high comfort silicone full face mask used by professionals in a wide variety of applications. It meets the highest demands for quality, reliability, secure fit and comfort. This full face mask is the successor to the Panorama Nova masks, a range which has proven itself over decades of use worldwide.
Benefits
Silicone mask body for safety and wearing comfort
- A double sealing frame with threefold sealing edges offers safe protection and a secure fit for almost all face shapes. The mask body is made of durable and hypoallergenic silicone (blue or yellow colour) which provides non-compromising wearing comfort – even during prolonged use.
Large field of vision
- The distortion-free lens with 180° wide angle provides a large field of view with excellent periphial vision. The lens is made from impact-proof polycarbonate with either a plastic or stainless steel lens frame available.
Efficient ventilation system
- The efficient ventilation system with separate inner half mask prevents the visor from misting up and provides a clear view.
Versatile use
- The X-plore 6570 is equipped with an Rd40 connection in accordance with EN 148-1 for use of the Dräger X-plore® Rd40 filter series.
5 point harness
- The comfortable five-point head harness not only ensures that the mask can be donned easily and quickly, but is wide enough to prevent any pressure points on the wearer’s head.
Simple servicing and logistics
- One universal size simplifies logistics and storage. The inside barcode allows for ease of recording and servicing the mask inventory.
Clear voice communication
- An integrated stainless steel voice diaphragm facilitates good communication.
The Dräger X-plore® 6530 is the most widely used full face mask from professionals in a wide variety of applications. It meets the highest demands for quality, reliability, secure fit and comfort. This full face mask is the successor to the Panorama Nova masks, a range which has proven itself over decades of use worldwide.
Benefits
Safe and comfortable fit
- A double sealing frame with threefold sealing edges offers safe protection and a secure fit for almost all face shapes. The mask body made from durable EPDM ensures a great level of wearing comfort even during prolonged use.
Large field of vision
- The distortion-free lens with 180° wide angle guarantees a large field of vision with excellent periphial vision. You have the choice between a lens made from impact-proof polycarbonate (with either a plastic or stainless steel lens frame) or an extremely scratch-resistant Triplex lens with high chemical resistance (with stainless steel lens frame).
Efficient ventilation system
- The efficient ventilation system with separate inner half mask ensures a fog-free lens and unobstructed view.
Versatile use
- The X-plore 6530 is equipped with an Rd40 connection in accordance with EN 148-1 for use of the Dräger X-plore® Rd40 filter series.
5-point harness
- The comfortable five-point head harness not only ensures that the mask can be donned easily and quickly, but is wide enough to prevent any pressure points on the wearer’s head.
Simple servicing and logistics
- One universal size simplifies logistics and storage. An inside barcode allows for ease of recording and servicing the mask inventory.
Clear voice communication
- An integrated stainless steel voice diaphragm facilitates good communication.
The Dräger X-plore® 6300 is the efficient yet low-cost full face breathing mask intended for price-conscious users not wishing to compromise on comfort or quality. This full face mask is the successor to the Panorama Nova Standard, a mask which has proven itself over decades of use worldwide—redesigned and improved with fresh colours and an integrated bar code.
Benefits
Secure and comfortable fit
- The mask body is made from durable and skin-friendly EPDM, with double-layer face seal and triple sealing edges which provides a secure and comfortable seal for every type of face.
Wide field of view
- The scratch-proof and distortionfree PMMA Plexiglas visor with 180° wideangle guarantees a large field of vision with excellent panoramic view.
Efficient ventilation system
- The efficient ventilation system with separate inner mask prevents the lens from fogging and ensures good vision.
5-point harness
- The comfortable five-point head harness not only ensures that the mask can be donned easily and quickly, but is wide enough to prevent any pressure points on the wearer’s head.
Easy maintenance and logistics
- One size fits all which simplifies logistics and stocking. The barcode on the inside simplifies the recording and maintaining of the mask inventory.
Versatile use
- The Dräger X-plore 6300 full-face mask is equipped with a Rd40 connection in accordance with EN 148-1 and can be combined with the extensive Dräger X-plore® Rd40 filter range.
Designed to protect life by alerting the team when a wearer becomes motionless or distressed, the Dräger Bodyguard® 1000 emits clear and distinctive signals and alarms to ensure quick and effective recognition, even in the worst environmental conditions.
Benefits
Tough, rugged design
- Rugged design for use under the most demanding of operational conditions, the Bodyguard 1000 will perform time after time no matter how extreme the environment. Watertight to IP 67 and designed for use in temperatures ranging from -30 °C up to 60 °C.
Simple to use and easy maintenance
- Bodyguard 1000 is free of periodic maintenance, with only battery replacement to plan, as and when required. With the same easy to use functionality as its big brother Bodyguard 7000, the Bodyguard 1000 features straight forward push button functionality to ensure simple operation, even whilst wearing gloves. The unit will perform an automatic full “self check” upon start up. Accidental switch off during use is eliminated by the options of tally insertion or two-button push, depending on the operating mode.
Compatible with all SCBA
- With optional alligator clip or securing clamp, the Bodyguard 1000 can be quickly and securely fitted to any SCBA, in any position, whether at the shoulder, waist or backplate.
New high profile audible and visual alarms
- After a nominal 25 seconds without motion and a further 8 seconds without cancellation, the Bodyguard 1000 will emit a directional full alarm to assist the fast location of a wearer in distress. Motion sensor timings can be configured according to preference by means of the RFID PC Link Module and a PC. In addition the high visibility twin fascia LED’s enable location in conditions of poor visibility. Continuous low frequency flashing blue lights allow easy location of team members during normal activities, and allow team members to remain visible to one another.
Data log of incident history
- As with Bodyguard 7000, the Bodyguard 1000 comes with full data log functionality allowing the downloading of incident history using Drägers RFID PC Link Module and our Windows based Software Package.
Choice of operating modes
- The device comes in a choice of operating modes, with either button operation or tally key operation for entrycontrol applications.
Temperature control during operation
- Dräger Bodyguard 1000 is equipped with a thermal alarm which sounds when the ambient temperature rises rapidly or exceeds safe working levels, making it unsafe for the user to remain in that environment.
The Dräger PSS® Merlin® Telemetry System offers a precise overview of the status of respiratory equipment wearers. The vital status information is communicated directly between the entry control point and the wearer. Technology, which supports the incident, significantly increases safety and protects the lives of your breathing apparatus wearers.
Benefits
Telemetry – For precise monitoring of breathing apparatus wearers
- The PSS Merlin System offers the choice of using two versatile versions. Firstly, you can use the PSS Merlin Entry Control Board, the Dräger Bodyguard 7000 or Bodyguard II electronic monitoring unit and the ATEX-approved PSS Merlin Modem.
Secondly, the system can be used with the Dräger PSS Merlin Software as opposed to the Entry Control Board. The Software, when used with the PSS Merlin PC Modem, offers additional benefits.
By using the PSS Merlin Modem, the latest information will be sent from the Bodyguard 7000 or Bodyguard II to the PSS Merlin Software or Entry Control Board, meaning that the incident commander is given real time information of the breathing apparatus wearer, enabling a prompt response in case of emergency situation.
Life critical information in real time
There is a two way communication between the wearer and the incident commander. Transmitted from the breathing apparatus wearer is the following data:
- Manual distress signal
- Automatic distress signal
- Cylinder pressure
- Time to whistle
- Elapsed time
- Withdrawal and evacuation signal
- Acknowledgment of global or individual evacuation signal
Via the Software or Entry Control Board, the incident commander is able to
- send individual or team evacuation
- acknowledge breathing apparatus wearer’s distress signals, automatic distress signals and withdrawal signals
Automatic activation and logging in
- For enhanced usability: When opening the cylinder valve, the system switches on both the Bodyguard 7000 and the PSS Merlin Modem. The PSS Merlin Entry Control Board is activated by the insertion of a tally key. The identity of the PSS Merlin Modem is read and a unique connection is established between radio and board. The system continuously monitors the status of the connection. When used with the Dräger PSS Merlin Software and the PSS Merlin PC Modem, it is even possible to log on the breathing apparatus automatically – without the need for insertion of a tally key.
- It is however still possible to establish the connection by a tally, if required. Personalization of the breathing apparatus can also be undertaken, enabling for easy documentation and transparency for tracking its usage.
Securely controlling the incident – Intuitive Merlin Software
- When using the PSS Merlin Software, the PSS Merlin Entry Control Board is not required. The PSS Merlin PC Modem communicates directly with the wearers’ PSS Merlin Modems. Even non-telemetry users can be displayed by entering a time to whistle countdown in the Software. Thanks to a weatherproof USB port, the robust and IP 65 rated PSS Merlin PC Modem does not require an additional power supply. In order to avoid loss of data, the system offers a three-way back-up: The PC Modem, the Software and an optional, external memory always save the latest status of the persons being logged on – no data will be lost. When using the overview mode, an incident commander can gather the information from several, independent entry control points. Analysis of this data gives a comprehensive picture to aid further decision making. A training mode gives users the ability to train in the operation of the software and carry out realistic incident simulations. Post incident, the data collected can be documented in a report whichit is then also possible to load intothe fire brigade administration software Drägerware.ZMS/fire.
All information at one glance
- The Dräger Bodyguard 7000 combines life critical status updates: Displaying cylinder pressure, time to whistle, acoustic and optical warning signals, automatic distress signals, manual distress signals. When used with the PSS Merlin Telemetry System, Bodyguard 7000 displays radio signalstatus. All data is stored on the device and can be documented or easily retrieved to optimize training.
Increased wearer comfort, maximum freedom of movement
- The PSS Merlin Modem is designed to fit perfectly onto the backplate of Dräger PSS 5000 and PSS 7000 series breathing apparatus. It is located centrally between the backplate and the cylinder resulting in a seamless integration with the ergonomic carrying system. The compact design decreases snagging risks; the clear waist belt allows more freedom of movement. As the PSS Merlin Modem is directly connected to the central electronics of the Bodyguard 7000, there is only need for a single recharge-able battery to supply power to both the Bodyguard 7000 and PSS Merlin Modem. This simplifies the battery logistics and charging process.
Increased charging efficency – even in trucks
- In order to save valuable time with battery logistics, in-cab chargers are available for both the PSS Merlin Modem and the PSS Merlin Entry Control Board. The batteries are re-charged easily and effectively, whilst inside the fire truck.
- For users who wish to maintain battery packs off the breathing apparatus, Dräger has developed a bench system which allows up to 4 battery packs to be charged simultaneously. Uniquely, this charger can also perform a health check on each pack. Simply insert the battery into the charger – the rest is automatically carried out by the charging station.
Increased safety during the incident
Vital information at one glance outside of danger zone
Sending distress signals
Acknowledgement of distress signals
Integrated incident reporting
Simple accountability with Dräger PSS Merlin Software
The Dräger Bodyguard® II is a fully electronic signal and warning unit for use with compressed air breathing apparatus and closedcircuit breathing apparatus. Combining a host of previously separate warning and monitoring devices into a single and simple to use instrument, the Bodyguard II is an ideal monitoring and safety solution for any first responder.
Benefits
One Device – Multifunctions
- The Bodyguard II combines a distress signal unit, pressure gauge, air time remaining readout, temperature sensor and data logger in a single device. At a glance the user can understand his/her air supply and environmental status in dangerous surroundings, whilst still maintaining full concentration on the task in hand.
Easy Operation
- Combining large buttons, a backlit display, two display modes (digital and analogue) and built-in motion sensors make the Dräger Bodyguard II a simple and easy device to operate, even with full firefighting clothing donned.
Continuous Data Monitoring
- Pressure, air time remaining and temperature are continuously monitored, with critical alarm alerts (audible/visual) set to user defined levels operating independantly of one another. All data is automatically logged in the Dräger Bodyguard II, allowing post incident analysis for training purposes and incident investigations.
Integrated PASS
- The Dräger Bodyguard II has an integrated PASS device within its single unit housing, further enhancing firefighter safety. With a built in motion sensor and a manual “panic” button the device can be activated automatically (during a period of non-motion) or manually in emergency situations, producing both audible and visual alarms to alert colleagues.
Telemetry Ready
- The Dräger Bodyguard II is supplied enabled to support the PSS Merlin Telemetry system. With no modifications nor firmware updates necessary, the upgrade to a full telemetry system is quick and easy. Once upgraded, the Dräger Bodyguard II with the PSS® Merlin Telemetry allows remote monitoring of the key SCBA statistics, allowing early deployment of rescue teams should an emergency scenario arise.
Flexible and Configurable
- Using our simple Windows based software, the Bodyguard II can be configured (via the IR communication port) to a user’s definied setting for alarm activation, for each of the inherent functions of the device. This flexibility allows the Dräger Bodyguard II to be implemented into any standard procedures with the minimum of training, enhancing the user’s personal safety and the Fire Brigade’s overall safety procedures.
The Dräger Bodyguard® 7000 is an electronic monitoring unit which provides continuous monitoring of personal information and operational status of the Dräger PSS® 7000 and PSS® 5000 self contained breathing apparatus.
Benefits
Essential data at a glance
- The Bodyguard 7000 is an all-in-one distress signal unit, pressure gauge and data logger, meaning you don’t have to carry additional weight around with you. All key data is brought together clearly and rapidly on one display.
All functions in one handheld device
- The lightweight device fits snugly in the palm of your hand, with large buttons which are also easy to operate even when wearing gloves. The large display is backlit making it easy to read without the need for a torch, even in conditions of poor visibility (digital and analogue). The new scrolling display text option provides detailed information enabling you to interpret each situation even more clearly.
Continuous data monitoring
- Pressure and remaining air time are permanently displayed on the Bodyguard 7000, meaning that you can exit an incident safely, confident in the amount of air remaining. User ID and battery level indication are also logged for effective post incident analysis. IFor applications using Draeger PSS Merlin modem, the data can be directly transmitted to the DrägerMan PSS Merlin entry control board.
User ID for easy post incident analysis
- The Bodyguard 7000 automatically logs data during use – individual user ID enables you to easily and quickly reproduce data about every step you have taken. This can be read using RFID cards. The Bodyguard 7000 even supplies a ready-formatted data report.
Flexible, configurable
- The Bodyguard 7000 functions can be easily configured according to your own requirements using Draeger PC Link Windows software. Data can be directly transmitted to your computer via an RFID system and processed by the user.
Integrated distress signal unit
- With integrated motion sensor and manually activated panic button, the Bodyguard 7000 gives clear audible and visual alarms when a fire fighter becomes motionless or is in distress, alerting their colleagues immediately. Option of button or tally version for entry control applications, and all alarms and pre alerts are logged for analysis.
Centralised power supply and electronics
- The Bodyguard 7000 features a centralised power supply, which is well protected alongside the electronics in the backplate. The electronics provide the display with information as well as transmit data to the FPS-7000 Mask Head-up Display (HUD) and PSS Merlin Modem should it be present, optimising battery logistics and reducing weight.
Hands-free monitoring of respiratory protection of emergency and rescue teams: The boards REGIS® 300 and 500 enable the incident manager to keep track of respiratory equipment wearers and their deployment time. Thanks to an automatic intermediate alarm, monitoring can be combined with other tasks. In co-usage with the external tracer, distances of up to 40 m are possible.
Benefits
Simultaneous monitring of three teams
- With Dräger REGIS, the incident manager is able to monitor up to three teams simultaneously, with up to three wearers per team. Easy to read displays with countdown timers inform about the remaining deployment time. The displays of both boards are illuminated with the touch of a button to ensure all important data is easy to see even in difficult conditions.
More safety with intermediate alarms
- A continuous beep is emitted once the deployment time of a team is over. To aid with assigning the right alarm with the right team, the corresponding LED flashes. The acoustic and visual alarm tracer also emits an alert after 1/3 and 2/3 of the deployment time has expired.
External tracer for more ease of movement
- Some incidents require that the person performing the monitoring must leave the vicinity of the board. In these cases, a highly visible external tracer can be combined with the board as an additional module. The built-in transmitter reliably relays any alarmm signals emitted by the monitoring board to the external tracer for a distance of up to 40 meters.
Full deployment monitoring with simple documentation
- Name of the equipment wearer, cylinder pressure at the beginning of the deployment, air supply, start and end of deployment time, as well as location: A clip attached to the board holds a sheet for entering all necessary data. The person performing the monitoring can later detach and file this sheet as needed. Name tags can be attached with snap hooks to the lower end of the board for help in visualizing the team members. The color of the tags also provides information about the type of respirators used.
REGIS 500: Coding plugs for different applications
- The deployment time may be shorter or longer depending on the type of respirator used. With the coding plugs for standard and short time respiratory protective devices, extended time respiratory protective device, or closed-cycle respiratory protective devices, the monitoring board panel can adjust automatically to a specific deployment time between 25 and 120 minutes. Simply insert the coding plugs into the corresponding slots and the countdown starts automatically.
Other advantages of the REGIS 300
- Three backlit displays
- Digital clock for real-time display
- Customisable deployment time
- Deployment time with negative sign starting at 0 minutes on display
- Made from durable plastic
- Corner protectors made of rubber
- Labeling field with intuitive symbolsn
- Clip to hold sheets and pen
- Other advantages of the REGIS 500
- Integrated Digital clock for real-time display
- Additional intermediate alarm at deployment halftime and remaining time of 10, 5, and 0 minutes
- Large backlit display
- Rubber edge protectors on side and pen holdery
Designed using leading technology and advanced materials, Dräger’s range of Composite Cylinders can be used in any application where breathing becomes difficult or impossible.
Benefits
Extremely resistant and easily cleaned
- All carbon composite cylinders feature an aluminium liner, wrapped with carbon fibre with a fibreglass outer layer with a smooth resin finish, This makes the cylinders lightweight, easy to clean and extremely resistant to shocks, chemicals and abrasion.
Complete, one-stop breathing apparatus
- Dräger designs and manufactures its own range of fully wrapped carbon composite cylinders, ensuring that the cylinders match and are approved for use with your Dräger breathing apparatus.
Customised to your requirements
- Order Dräger cylinders tailored to meet your requirements: with your own logo, labels and colours. Personalising your cylinders makes it easier for you to allocate and manage your equipment.
Extensive range – a cylinder for every application
- 2 up to 9 litre cylinders in volume, 15 to 30 years design life, 200 or 300 bar, a range of valve configurations including excess flow valve or twin pack options: with Dräger you’re sure to find the right cylinder for every application.
Dräger Quick Connect: Simple and fast cylinder changes
- Whether its during use or maintenance, you can change cylinders quickly without the need for screwing or unscrewing the handwheel manually. The Dräger Quick Connect cylinder valve connection saves you time – and ensures a safe connection between the cylinder and breathing apparatus.
One of the many benefits of the FPS® 7000 Facemask is the option of fitting a head up display. Always within the field of view the head up display allows easy monitoring of the cylinder contents without any manual action by the wearer.
Benefits
The display fits easily into the FPS 7000 facemask, and can be quickly fitted without the need for tools, saving time during maintenance. In an emergency you can transfer the HUD between facemasks in a matter of seconds.
The HUD is well protected in the facemask and can not be damaged by heat, shocks, humidity or chemicals.
Providing on average 360 hours of use and easily changed without the need for tools.
The transmitter unit wirelessly transfers data to the facemask, avoiding time consuming connection of cables, reducing costs and connection errors.
Red, amber and green LEDs provide precise information about your cylinders air pressure at all times. The display automatically adapts to ambient brightness enabling clear indication of pressure information , even under poor lighting conditions.
- Additional low air pressure warning
In addition to the SCBA’s primary low pressure alarm a red LED on the HUD flashes if the cylinder pressure reaches the low pressure warning threshold. This provides the wearer with an additional warning.
Search
Menu